Bit?
Video Tutorial:
Introduction
Android has become one of the most widely-used operating systems across the globe, and the technology powering it has been advancing significantly in recent years. With the launch of Android 64-bit version, it has brought about an entirely new experience for users. The difference between a 32-bit and 64-bit Android is not easily identifiable to the naked eye, but it can have a significant impact on the performance of your device.
In this blog post, we will explore the differences between 32-bit and 64-bit Android, and also outline the steps to check if your Android device is running on a 32-bit or 64-bit version. By understanding this information, you will be better equipped to optimize the performance of your Android device.
What’s Needed
Before we dive into how to check if your Android device is running on a 32-bit or 64-bit version, let’s first take a look at what you need to have. Here are a few things you need:
- An Android device (any recent smartphone or tablet should be fine)
- Access to your device’s settings screen
What Requires Your Focus?
To check whether your device is running on a 32-bit or 64-bit version of Android is a pretty simple procedure. All you need to do is follow the steps that we will lay out for you. However, you need to focus on a few points before starting.
- Make sure you have checked whether your device is compatible with 64-bit architecture.
- Make sure you know the steps to check the Android version on your device as that is a basic requirement for the procedure that we are going to discuss.
Different Methods to Check Android 32 Bit Or 64 Bit
Now that you know what you need and what to focus on, let’s get into the methods to check if your Android device is running on a 32-bit or a 64-bit version.
Method 1: Checking Through Settings
To check if your device is running on a 32-bit or 64-bit version, follow the steps below:
- Unlock your device screen and go to "Settings".
- Scroll down and tap on "About phone" or "About tablet", depending on your device.
- Scroll down to find the "Android version" section.
- Look for "Android version" and "Build number".
- Tap "Build Number" about seven times continuously.
- When you are done tapping, a message will appear indicating that you are now a developer.
- Go back to the main "Settings" screen and tap on "Developer options".
- Scroll down to the “"lS-style run-time" checkbox and look for "64-bit." If it’s there, your device is running on 64-bit architecture. If it’s not there, your device is running on 32-bit architecture.
Pros:
- Easy and quick to check.
- No software or third-party application installation required.
Cons:
- Does not work for all devices.
- May not be accurate in some cases.
Method 2: CPU-Z Application
The CPU-Z application is a popular third-party software used to check the system specifications of a device. You can use it to check if your Android device is running on a 32-bit or 64-bit version.
Here are the steps to follow:
- Launch the Google Play Store and search for the CPU-Z application.
- Install the application on your device, and then launch it.
- After launching the application, go to the SOC tab.
- Under the "Instruction Sets" section, check if it says, “ARM64” or “AARCH64”. If it says either of these, then your device is running on a 64-bit architecture. If it says “ARMV7” or “ARM”, then your device is running on a 32-bit architecture.
Pros:
- Reliable and accurate.
- Provides more detailed information about your device’s hardware specifications.
Cons:
- Requires the installation of a third-party software.
- May not be accurate in some cases.
Method 3: Checking Through Benchmarking Apps
Benchmarking applications are used to evaluate the performance of your device by measuring its processor speed, memory, graphics, and other performance metrics. Some of them can also be used to check if your device is running on a 32-bit or a 64-bit version.
Here are the steps to follow:
- Launch the Google Play Store and search for "Antutu Benchmark" or "Geekbench 4" application.
- Install the application on your device, and then launch it.
- After launching the application, run a benchmark test.
- Once the benchmark test is complete, go to the "CPU" section of the application.
- Under the "Instruction Set" section, check if it says, “ARM64” or “AARCH64”. If it says either of these, then your device is running on a 64-bit architecture. If it says “ARMV7” or “ARM”, then your device is running on a 32-bit architecture.
Pros:
- Provides detailed information about your device’s hardware specifications as well as software performance.
- No need to have a technical understanding.
Cons:
- Requires the installation of a third-party software.
- May not be accurate in some cases.
Why Can’t I Check whether My Device is Running on 32-bit or 64-bit Architecture?
Sometimes you may encounter difficulties or errors that make it impossible to check whether your device is running on a 32-bit or 64-bit architecture. Here are a few reasons that might explain why you can’t check:
1: Your Device is too Old:
Older devices may not support 64-bit architecture, so you won’t be able to check if your device is running on 64-bit architecture using the methods outlined above.
Fix:
You may want to consider upgrading your device to a newer one that supports 64-bit architecture.
2: Your Device’s Build is Not Supporting 64-bit:
Sometimes your device manufacturers may offer a 64-bit compatible processor, but they may not enable the feature. Hence, it may not be possible to check whether your device is running on 64-bit architecture.
Fix:
Contact your device manufacturer or the OEM manufacturer to ask if your device’s build supports 64-bit architecture.
3: Method Incompatibility:
Some models may not support the methods outlined above, and there may not be a suitable method available to check whether your device is running on a 32-bit or 64-bit architecture.
Fix:
Check with the device manufacturer or OEM manufacturer to see if there is a method available for checking if your device is running on a 32-bit or 64-bit architecture.
Implications and Recommendations
The impact on your device between running a 32-bit or 64-bit version of Android is not always clear. That being said, 64-bit Android is capable of delivering better performance and has more security features than the 32-bit version. If you have a newer device, and you want to get the most out of it, upgrading to a 64-bit version of Android is the way to go.
5 FAQs about How to Check Android 32 Bit Or 64 Bit
Q1: Is it important to know which version of Android my device is running on?
A: Yes, it is important to know which version of Android your device is running on as it helps you determine the compatibility of applications, hardware, and software with your device.
Q2: What is the difference between 32-bit and 64-bit architecture?
A: The main difference between 32-bit and 64-bit architecture is processor speed. A 64-bit processor can handle larger amounts of data and perform more operations than a 32-bit processor.
Q3: Can I change my device’s architecture from 32-bit to 64-bit?
A: No, you cannot change the architecture of your device. It is determined by your device manufacturer and the hardware specifications of your device.
Q4: What is the significance of the CPU-Z application in determining the architecture of my device?
A: The CPU-Z application provides detailed information about your device’s hardware specifications, including the instruction set. This helps you determine whether your device is running on a 32-bit or 64-bit version.
Q5: Does my device have to be rooted to use benchmarking applications to check the architecture of my device?
A: No, benchmarking applications can be used on both rooted and unrooted devices to check the architecture of your device.
In Conclusion
Knowing whether your Android device is running on a 32-bit or 64-bit version of the operating system is important. Such knowledge helps you determine the compatibility of applications, hardware, and software with your device. Above, we have outlined three methods to check if your Android device is running on a 32-bit or 64-bit version. Now that you know how to check, you can easily optimize your device’s performance for better user experiences!